User Interface

One Window, Many Views

SAFE offers a single user interface to perform: Modeling, Analysis, Design, Detailing and Reporting. A model explorer is available for quick access to objects, properties, and forms.

Enhanced User Interface

Users can have up to 4 simultaneous display windows open.

Model Explorer

The model explorer gives users quick acess to all of the data in their SAFE model. Navigate your model by clicking on saved views and edit your model by dragging and dropping properties directly onto objects in the model window.

Modeling

Templates

SAFE offers a variety of templates for quickly starting a new model including flat slabs, two-way slabs, basemats, waffle slabs, ribbed slabs, and single or combined footings.

Model Views

View and manipulate analytical model with great precision.

Analytical Model

Analytical model views display the finite element model of the structure which is made up of the the connectivity of the joints, frames, shells, and defined meshing.

Physical Model

Physical model views that accurately displays cardinal insertion points, local axes rotations, wall junctions, and geometry.

Drawing Tools

Intelligent Snaps

Intelligent snaps make model generation simple by automatically detecting intersections, extensions, parallels, and perpendiculars. Drawing helper tools will show physical extrusions even when in analytical draw mode.

Architectural Tracing

Users can import an architectural DXF or DWG into the background and use it as tracing paper to generate slab geometry. Alternatively, one can right button click and automatically convert the architectural shape into a SAFE structural object.

Horizon Graph Paper

Horizon graph paper adjusts to optimal scale when zooming and aids in the drawing of the model.

User Coordinate System

A User Coordinate System acts like a new coordinate system that is defined with respect to a certain point or line. SAFE allows for many coordinate systems to be defined in a single model.

Grid Systems

In SAFE, grids can be defined as cartesian, cylindrical, or general free-form grid systems. There is no limit to the number of grid systems in a model and they can be rotated in any direction or placed at any origin within the model.

Developed Elevations

Developed elevations can elevate any drawn path on a plan view. This is particularly useful for elevating a path along a design strip.

Interactive Database Editing

Interactive database editing allows users to edit model data from a table view which simplifies the task of making changes to the model. Tables are easily exportable and importable from Excel and Microsoft Access.

Object Based Meshing

Object based meshing generates meshes based on the specified maximum element size. It will mesh parallel and perpendicular to the longest edge, grid system, or area local axes and will aim to maintain good element aspect ratios.

Dimension Lines

Dimension lines can be drawn on the SAFE model in both architectural or decimal units. They are linked to the objects that they are referencing so if the size of the object changes, so will the dimension line.

Structural Components

Foundations, Basemats, and Footings

SAFE is ideal for modeling foundations, basemats, and footings. Easily model soil supports and zero tension soil models with uplift analysis. The area assignment of soil supports is based on the subgrade modulus, and they automatically adjust whenever the mesh changes. Basemat foundation models can include pedestals, walls, columns, beams, and piles in addition to the foundation area.

Walls and Ramps

Wall and ramps can be modeled as line loads, line supports, or explicitly modeled with wall elements. Define ridge zones to prevent slab deformations at the wall or ramp location.

Columns

Columns in SAFE can be Rectangular, T-shaped, L-shaped, Circular, or General with user-defined properties. Rigid zones can be defined to prevent slab deformations at column locations. Drop panels can be easily added at column capitals.

Insertion Points

Insertion points are used to define offsets for beams and columns. They can either be defined on quick SAFE defined cardinal points or based on user-defined dimensions.

Spring Supports

Spring supports are used to define soil supports. They can be defined as either points, lines, or areas and as tension only or compression only.

Design Strips

Design strips are used to define how reinforcement requirements are to be calculated. SAFE can automatically define the strips for you, or you can define them yourself.

General Design Strips

Orthogonal, non-orthogonal, multi-segment, and varying width design strips are all supported supported by SAFE.

Automatic Width Strips

Design strip widths can be determined automatically by SAFE, or they can be manually defined by the user for more complex designs.

Post-Tensioning (P/T)

SAFE includes the ability to define post-tensioning in slabs, as banded or distributed tendons.

P/T Overview

An interactive tendon editor simplifies the task of laying out the tendon profiles. Tendon layouts can also be automated based on strip position and direction.

Autostrip and Layout

SAFE has templates built in to define a quick tendon layout based on strips. There are automated profiles for specified precompression and balancing ratios.

Loading

Loading Diagrams

Show the the loads in both 2D and 3D views of your SAFE model. Display color contoured area loading diagrams with loading values, or mouse over various parts of your model to get instantaneous loading values.

Load Cases and Combinations

SAFE allows for an unlimited number of load cases and combinations. Design combinations will automatically be added based on the selected design code, including strength and service combinations. Linear additive, envelope, absolute additive, SRSS, and range functions have been built in to the load combination editor for efficiency.

Point, Line, and Area Loads

Point loads can be defined as single points or point loads on lines or areas. Point loads include a load size for punching shear. Line loads can be defined as uniform or trapezoidal. Area loads can be defined as uniform or non uniform surface loads.

Auto Pattern Live Loads

Auto pattern live loads are automatically generated patterns based on the grids defined by design strips. Results from each “single panel” are combined with the Range Add load combination. User-defined pattern live loads can also be included.

Tendon Loads and Losses

Tendon loads and losses are easily defined and calculated by SAFE. Users can define jacking from either end of the tendon or both. The specified jacking stress is converted to load. Calculation of losses can based on a force percentage, user-defined stress values, or on more detailed calculations.

Analysis

Overview

CSI solvers have been tried and tested by the industry for over 35 years. The SAPFire Analysis Engine can support multiple 64-bit solvers for analysis optimization and perform both Eigen Analysis and Ritz Analysis.

Deflection Control

Deflection control can be performed using a nonlinear analysis or a long-term cracked analysis which takes in to account concrete creep and shrinkage.

Dynamics

Dynamic analyses can be performed using either Ritz or Eigen Vectors. Response spectrum loads and modes can be directly imported from ETABS.

Design

Strip Based Design

SAFE will calculate the minimum reinforcement requirements of area, intensity, or number of bars. Design will be performed at multiple stations. Design strips can be non-orthogonal and of varying width.

FEM Based Slab Design

Finite element based design does not require design strips. It is ideal for complex geometry where defining strips can be difficult. The design will output contour plots of rebar density by averaging of peaks over user defined widths. This helps with identifying "hot spots" for reinforcing design.

Beam Design

SAFE performs design of conventional and post-tensioned concrete beams per code minimum reinforcement requirements. Flexure, shear, and torsion are all considered in design.

Punching Shear Check

The punching shear check and design in SAFE considers column location, openings, and slab edges. SAFE will also perform an additional drop panel check and design punching reinforcement ties or shear studs if required.

Post-Tensioning Stress Checks

Post-tensioning stress checks are performed for transfer, final, and long term conditions. SAFE will display top/bottom of slab stress contours as well as demand capacity ratio contours that users can mouse over for instantaneous values.

Design Codes

SAFE will peform both traditional reinforced concrete design checks as well as post-tensioned concrete design.

Output and Display

Deformed Geometry

Deformed geometry can be shown after running the analysis. Values are displayed instantaneously when you mouse over the model. The deformed geometry can be displayed as filled or line contour plots.

Force Diagrams

Display axial force, shear, moment, torsion, and stress diagrams on beams or strips for individual load cases or combinations in both 2D and 3D views. Minimum and maximum values will automatically be displayed.

Beam Forces

Force diagrams can be displayed for any component.

Strip Forces

Mouse over the force diagrams for instantaneous values.

Shell Contours

Display force, moment, shear, and stress contour plots based on a particular load case or load combination in both 2D or 3D views.

Shell Contour Diagrams

Display shell contours as load flow arrows or as stress contour plots.

Bearing Pressure

Display type of reactions as point recations, net/point wall reactions, or soil pressures.

Reaction Diagrams

Display selected reaction components for load cases and combinations as vectors and values, or as tables that can be positioned by the user.

Animations and Image Capture

Make your work shine by capturing images as EMF, BMP, JPG, TIF, GIF, or PNG and include them in your client reports. SAFE also performs video capture of animations as AVI files.

Tabular Output

View database tables containing all input data, analysis results, and design results in a tabular format within the SAFE user interface. Users can filter, sort, and query the table data and print or save the data to Microsoft Access, Excel, HTML, or Text formats.

Rendered Views

Display and capture realistic model views, including rebar cages, in a 3D view that is based on the SAFE detailing rebar layouts.

Detailing

Drawing Generation

SAFE will detail your concrete slab based on the design results. Specify detailing rules and choose from standard, metric, and ANSI sheet size and engineering, metric, and architectural scales.

Drawing Sheets

Typical drawing sheets automatically generated and are composed of drawing component views. Add views from the component list or by drag-and-drop directly from from the Model Explorer onto the drawing sheets.

Title Blocks

Three predefined title block choices are built in to the SAFE Detailer that allow you to import your title block from a DXF.

Detailing rules

Control bar sizes and spacing, beam and slab curtailment rules, and control information displayed in rebar callouts. Specify bars around openings or choose to detail only bars above a typical quantity.

Annotations

Edit drawing component views by modifying text size, font and text placement.

Component Views

Drawing component views are the basic building blocks for drawings. Drag framing plans, reinforcement plans, section cuts, rebar tables and schedules, bill of quantities, reinforcement profiles, tendon layout plan, and tendon profile elevations onto sheets to create your drawings.

Reinforcement Plans

SAFE detailing will display all reinforcement plans to show indicative bars or all bars.

Reinforcement Plan Overview

Users can customize rebar callouts or bar marks. Reinforcement will always follow strip directions.

Editing

Edit rebar size, number, and length and all associated views will automatically be updated. Quickly review the provided reinforcement versus required reinforcement.

Tendon Layout Plans

Detailing of tendons in SAFE will show all tendons or indicative tendons, anchor and stressing end indicators, and tendon profile elevations.

Section Cuts

Get an instant section cut elevation by defining sections and ranges through slabs, beams, and mats.

Print and Export Drawings

Print drawings and views directly to a printer or plotter. Alternatively, export drawings and views to DXF or DWG format and edit drawings further in AutoCAD or other CAD software.

Reporting

Report Generation

The report generator features include an indexed table of contents, model definition information, and analysis and design results in tabulated format. The report generation is fully customizable to include only the content that you want.

Import and Export

Supported Formats

Import models from SAP2000 and ETABS. All loads, geometry, section properties, and wall deformations can be imported. Import and export geometry and result plots from DXF or DWG files. SAFE is also compatible with Autodesk Revit Structure.

Информационное моделирование

Повышение эффективности

При совместной работе с архитекторами или другими организациями обмен моделями является обычной практикой. Использование программного обеспечения CSI позволяет эффективно сотрудничать с другими командами через концепцию Информационного моделирования зданий (BIM).

Гибкость рабочего процесса

Создать модель можно в программном обеспечении CSI, а затем отправить ее в стороннее приложение или наоборот.

Интеграция на основе Открытого программного интерфейса (API)

Интеграция с ведущими разработчиками программного обеспечения BIM была выполнена с использованием API для повышения уровня совместимости моделей.

Autodesk Revit Structure

CSI разработали плагин CSiXRevit для Autodesk Revit Structure.

CSiXRevit, плагин для Autodesk Revit Structure, разработанный CSI, обеспечивает двунаправленную связь между SAP2000, ETABS, SAFE и Autodesk Revit Structure ® 2014.

Варианты обмена данными:
- из Revit Structure, создание новой модели CSI
- из Revit Structure, обновление существующей модели CSI
- из ПО CSI, создание нового проекта Revit Structure
- из ПО CSI, обновление существующего проекта Revit Structure

Эти варианты предусматривают полный обмен данных между программным обеспечением CSI и Autodesk Revit® Structure.

Tekla Structures

Двунаправленная связь ПО CSI с Tekla Structures, используя встроенный API интерфейс

Связь между Tekla Structures и SAP2000 или ETABS позволяет создать модель в любом приложении, а затем передать его в другое. Возможен полный обмен данными, включая передачу только измененных участков моделей из SAP2000 или ETABS в Tekla Structures. Кроме того, возможно объединять модель TEKLA Structures с существующими моделями SAP2000 или ETABS.

Industry Foundation Classes (IFC)

Поддержка моделей Industry Foundation Classes (IFC) обеспечивает совместимость с другими BIM приложениями. SAP2000, CSiBridge и ETABS полностью поддерживают импорт и экспорт в форматы IFC 2x3 и IFC 4.

Таблица конфигураций     Назад к описанию